RKO's SZS gas and oil fired boiler: double-drum water tube packaged design, 4-20 t/h, 1.25-2.5 MPa. Fast load changes, high pressure. Built in Zhengzhou since 1981. Service in Asia, Africa and the Middle East.
The SZS gas and oil fired boiler is a double-drum water tube packaged boiler from RKO, designed for higher pressure and fast load changes. It delivers 4-20 t/h with pressures from 1.25 to 2.5 MPa. Built in Zhengzhou since 1981, it is engineered for the demands of Asia, Africa and the Middle Eastn industry.
How the SZS Gas and Oil Boiler Works
The SZS is a D-type water tube boiler. Two drums — the upper steam drum and the lower water drum — are connected by a bank of tubes, and the furnace is formed by a membrane water wall. Burners fire gas or oil into the furnace, and hot gases travel through the tube bank and convection section before exiting the stack. This arrangement allows the boiler to withstand higher pressures than fire tube designs and to respond quickly to load swings.
The packaged design means the boiler is assembled and tested at our factory before shipment, reducing on-site installation time. A modulating burner and advanced controls maintain stable steam parameters even when demand fluctuates, making the SZS suitable for processes that require rapid steam response.
Key Specifications
The table below outlines the standard range for the SZS series. Specific configurations can be tailored to your project requirements.
| Parameter | Value |
|---|---|
| Model | SZS |
| Type | Double-drum water tube packaged boiler |
| Capacity | 4-20 t/h |
| Rated pressure | 1.25-2.5 MPa |
| Fuel | Natural gas, LPG, diesel, heavy oil, dual fuel |
| Efficiency | Up to 95% (with economizer) |
| Control system | PLC-based, automatic modulating burner |
| Design standard | GB/T 16507, ASME (optional) |
Fuel and Capacity Range
The SZS series is available in capacities from 4 to 20 t/h, with pressure ratings from 1.25 to 2.5 MPa. It can burn a wide range of fuels: natural gas, LPG, diesel, heavy oil, and dual-fuel configurations. This flexibility allows you to use the most economical fuel available in your region. The boiler is equipped with a modulating burner that automatically adjusts firing rate to match steam demand, maintaining high efficiency across the load range.
Applications
The SZS boiler is ideal for industries that need higher pressure steam and rapid load changes. Typical applications include:
- Food and beverage processing (sterilization, cooking, concentration)
- Textile and garment manufacturing (dyeing, finishing)
- Chemical and pharmaceutical production (reactors, distillation)
- Rubber and plastics processing
- Pulp and paper mills
- District heating and power plants
In Asia, Africa and the Middle East, the SZS is particularly suited to manufacturing plants in industrial zones such as Cavite, Laguna, and Cebu, where steam demand can vary significantly during production cycles.
Installation and Service in Asia, Africa and the Middle East
RKO supports your project from specification to commissioning. The packaged design of the SZS minimizes site work, and our engineers can provide guidance on foundation, piping, and electrical connections. We offer remote technical support and can arrange for factory-trained service personnel to assist with installation and commissioning in Asia, Africa and the Middle East.
For spare parts, our regional warehouse and partner network help ensure quick availability of wear components such as burner nozzles, gaskets, and control sensors. We also offer operator training to help your team run the boiler safely and efficiently.
To discuss your project, please contact our team. You can also explore our full range of industrial boilers or learn more about the SZS gas and oil fired boiler.
Frequently Asked Questions
What is the difference between SZS and fire tube boilers?
SZS is a water tube boiler, where water flows inside tubes and hot gases surround them. This design allows higher pressures (up to 2.5 MPa) and faster response to load changes compared to fire tube boilers, which are typically limited to lower pressures.
Can the SZS boiler burn both gas and oil?
Yes, the SZS can be configured for dual fuel operation, allowing you to switch between gas and oil based on availability and cost. The burner and control system are designed to handle both fuel types safely.
What is the typical lead time for delivery to Asia, Africa and the Middle East?
Lead time depends on capacity and configuration. Standard models typically ship within 30-45 days after order confirmation, plus shipping time to Manila or other ports. Please contact us for a precise schedule.
Is the SZS boiler compliant with Asia, Africa and the Middle Eastn regulations?
The SZS is designed and manufactured to international standards such as GB/T and ASME. We can provide documentation to support compliance with local boiler codes and assist with the registration process. Please consult with local authorities for specific requirements.
