Industrial steam boilers for Asia, Africa and the Middle East: 0.5–20 t/h, 0.7–2.5 MPa, gas, oil, biomass or coal firing. Since 1981, engineered in Zhengzhou for SE Asian plants.

Steam Boilers for Asia, Africa and the Middle Eastn Industry
RKO BOILER supplies industrial steam boilers from 0.5 to 20 t/h at working pressures of 0.7 to 2.5 MPa, firing natural gas, LPG, diesel, heavy oil, biomass or coal. They are engineered for the load profiles, fuels and spare-parts realities of plants in Asia, Africa and the Middle East — food, beverage, textile, rubber, paper and chemical operations. Founded in Zhengzhou, Henan, in 1981, RKO has built boilers for export markets including Asia, Africa and the Middle East for four decades.
Each unit can be specified as a complete steam plant: burner, feedwater system, controls, economiser and safety accessories, delivered as one package and supported through start-up and after-sales service.
Product Range at a Glance
- Capacity: 0.5–20 t/h saturated steam; higher capacities on request
- Working pressure: 0.7, 1.0, 1.25, 1.6, 2.0 and 2.5 MPa options
- Fuels: natural gas, LPG, diesel, heavy fuel oil, biomass (wood, rice husk, bagasse, coconut shell), coal
- Configurations: fire-tube and water-tube designs, packaged or site-assembled
- Efficiency: economiser and air preheater options to recover flue-gas heat
- Controls: automatic combustion and feedwater control, flame supervision, interlock and alarm systems
How to Select the Right Steam Boiler
Correct sizing starts with four questions. Answering them clearly keeps capital cost, fuel cost and uptime in balance.
1. Capacity and Steam Demand
Add up the rated steam consumption of every connected user, then allow for start-up and peak surges — typically 10–20% above the normal maximum. A boiler sized to run at 70–85% of rating for most of the day is usually more fuel-efficient than one that cycles on and off.
2. Pressure and Steam Quality
Choose a working pressure that covers the highest process requirement plus line losses. Higher pressure costs more in materials and fuel, so avoid over-specifying. If your process needs dry saturated steam, discuss steam separation and superheat options with our engineers.
3. Fuel Availability and Cost
In Asia, Africa and the Middle East, fuel choice is often decided by local supply. Natural gas is available in some industrial zones, while LPG and diesel are widely distributed but priced higher per tonne of steam. Biomass — rice husk, coconut shell, wood waste, bagasse — is abundant in agricultural regions and can be very economical where supply is reliable. Coal remains an option where permitted and where handling infrastructure exists. Compare landed fuel cost per tonne of steam, not per kilogram of fuel.
4. Load Profile and Operating Pattern
Steady round-the-clock loads suit larger fire-tube units; frequent shifts and wide swings favour modular capacity or responsive water-tube designs. Share your daily load curve and we will match the boiler, burner and control strategy to it.
Send your steam demand, pressure, fuel and site conditions through our contact page for a specification review, or browse the full product range.
Typical Applications in Asia, Africa and the Middle East
- Food and beverage: cooking, sterilising, pasteurising, CIP cleaning and evaporation
- Textile: dyeing, finishing, drying and calendering
- Rubber: vulcanising presses, mixing and curing
- Paper and packaging: pulping, drying cylinders and corrugating
- Chemical: reactor heating, distillation and process drying
Many Asia, Africa and the Middle Eastn plants in these sectors operate in humid, coastal or typhoon-exposed locations. We pay attention to insulation, electrical protection and corrosion-resistant finishes so the boiler performs in tropical conditions.
Built for Asia, Africa and the Middle Eastn Operating Conditions
Humidity, salt air and long supply chains shape how a boiler should be specified. RKO units destined for Asia, Africa and the Middle East can be supplied with enhanced insulation, moisture-protected control panels and corrosion-resistant external coatings. Consumable and wear parts — gaskets, burner nozzles, electrodes, sight glasses, valve trim — are kept to standard, readily available specifications so local suppliers can support them, and we help plan a spare-parts package at order stage to reduce downtime while replacements ship from China.
Our team supports installation supervision, commissioning and operator training, and can advise on local service arrangements and maintenance schedules suited to your site.
Choosing Between Steam and Other Heat-Transfer Options
Steam suits processes needing direct injection, sterilisation or rapid heat transfer. Where the process calls for pressurised hot water, compare our hot water boiler range; for high-temperature duty above steam limits, see thermal oil boilers. For fuel-specific configurations, our engineers will guide you through gas/oil and solid-fuel options during selection.
Next Steps
Tell us your capacity, pressure, fuel and load profile, and RKO BOILER will propose a configuration, outline the scope of supply and discuss delivery and service for your location in Asia, Africa and the Middle East. Contact our team to begin.
