The DZH is a horizontal manual-feed boiler for coal and biomass, 0.5–4 t/h, built for small plants and remote sites in Asia, Africa and the Middle East that need simple, low-cost steam.
The DZH is a horizontal, manually fed boiler that burns coal or biomass and produces 0.5–4 t/h of steam. It is built for small plants and remote sites in Asia, Africa and the Middle East where operators want straightforward firing, easy maintenance and a low capital cost rather than automated fuel handling. RKO has manufactured industrial boilers in Zhengzhou, Henan since 1981, and the DZH is the entry point of our coal and biomass range.
How the DZH works
Fuel is shovelled by hand through the firing door onto a fixed grate inside the furnace. Primary air is supplied by a forced-draft fan through the grate, so the coal or biomass burns in a bed that the operator controls by hand: fuel depth, firing rate and air are adjusted together to hold steam pressure. Hot flue gas leaves the furnace, passes through the convective tube bank and exits at the stack; feedwater in the shell absorbs that heat and turns to steam.
Because there is no stoker, auger or pulveriser, the fuel path is short and visible. The operator can see the fire, judge the bed and respond immediately. That simplicity is the point of the DZH: fewer driven parts, less electrical load, and maintenance that a plant’s own fitters can handle with basic tools.
Key specifications
| Parameter | DZH data |
|---|---|
| Type | Horizontal, manual-feed, fixed-grate steam boiler |
| Rated capacity | 0.5–4 t/h steam |
| Design pressure | 0.7–1.6 MPa |
| Steam temperature | Saturated, matched to design pressure |
| Fuels | Bituminous coal, wood chips, sawdust, rice husk, coconut shell, palm kernel shell |
| Combustion | Fixed grate, hand firing, forced-draft fan |
| Structure | Horizontal shell with convective tube bank, packaged on a steel base |
| Heat recovery | Economiser optional |
| Dust removal | Cyclone or bag filter optional |
| Control | Relay-based or basic PLC panel; manual firing control |
Capacity, pressure and fuel details are confirmed per order so the boiler matches your steam load and the fuel you can actually buy.
Fuel and capacity range
The DZH is offered from 0.5 to 4 t/h, which covers small process lines, workshops, food plants and estates. It accepts solid fuels that are common in Asia, Africa and the Middle East: bituminous coal, wood chips and sawdust from local mills, rice husk, coconut shell and palm kernel shell. Fuel should be reasonably sized and dry; the manual grate rewards consistent fuel more than a fluidised bed would, and the operator sets the firing rate to suit the load.
Where fuel quality varies from delivery to delivery, the manual grate is an advantage: the operator can see the bed and adjust rather than rely on a fixed feed rate. An economiser can be added to recover heat from the exhaust and reduce fuel consumption.
Applications
- Rice mills, feed mills and coconut processing plants needing process steam
- Food and beverage plants with small, steady steam demand
- Plywood, sawmills and biomass processing sites that can use their own residues
- Small chemical, textile and laundry operations
- Remote or island sites where fuel is delivered in batches and simple maintenance matters
For larger capacities or automated firing, see our full coal and biomass fired boiler range and the wider RKO product line.
Installation and service in Asia, Africa and the Middle East
RKO supplies the DZH as a packaged unit on a steel base, so site work is mainly foundation preparation, piping, electrical connection and stack assembly. We provide drawings and an installation guide, and can arrange commissioning support for Asia, Africa and the Middle Eastn projects. Our team works with local contractors and can advise on fuel storage, ash handling and stack height for your site.
For spare parts, grate and refractory wear items, and service scheduling, contact our team through the RKO contact page. We keep the DZH design conventional so that common wear parts can be sourced and fitted without specialist crews.
FAQ
What capacity does the DZH cover?
The DZH is built from 0.5 to 4 t/h of steam, with design pressure from 0.7 to 1.6 MPa. We confirm the exact capacity and pressure against your steam load before manufacture.
Can it burn both coal and biomass?
Yes. The fixed grate accepts bituminous coal, wood chips, sawdust, rice husk, coconut shell and palm kernel shell. Because firing is manual, the operator adjusts the bed and air to suit the fuel on hand.
Is the DZH suitable for a remote site in Asia, Africa and the Middle East?
It is designed for that situation. With no stoker, auger or pulveriser, there are fewer driven parts and less electrical demand, and maintenance can be handled by plant staff with basic tools.
How do I get a quotation?
Send your required capacity, working pressure, fuel type and site location through the contact page. We will confirm the model, optional economiser and dust removal, and the delivery scope for your project.
