Skip to content
RKO BOILER

DZL Coal and Biomass Fired Boiler

RKO's DZL boiler is a single-drum, three-pass chain grate unit for coal, rice husk, wood chips and bagasse, from 1 to 20 t/h at 0.7-2.5 MPa. Built in Zhengzhou since 1981.

Home // Product models // DZL Coal and Biomass Fired Boiler

RKO's DZL boiler is a single-drum, three-pass chain grate unit for coal, rice husk, wood chips and bagasse, from 1 to 20 t/h at 0.7-2.5 MPa. Built in Zhengzhou since 1981.

The RKO DZL is a single-drum, three-pass chain grate boiler built to fire coal and biomass such as rice husk, wood chips and bagasse. It covers 1-20 t/h at 0.7-2.5 MPa and suits factories, mills and plants across Asia, Africa and the Middle East that need steady steam from locally available fuel. Every unit is engineered and manufactured at our Zhengzhou works, founded in 1981.

How the DZL Boiler Works

Fuel is fed by a moving chain grate that carries the bed slowly through the furnace, so coal or biomass burns evenly across its width. Flue gas then passes through three heat-absorbing stages — furnace, convection bank and a final pass — before leaving the boiler, which wrings more heat from each kilogram of fuel. The single-drum vertical layout keeps the unit compact and simplifies steam and water connections on site.

  • Chain grate: mechanical feed and ash discharge for consistent combustion with mixed fuels.
  • Three-pass design: longer gas path, lower exhaust temperature, better efficiency.
  • Single drum: straightforward water level control and routine inspection.
  • Fuel flexibility: designed to run coal, rice husk, wood chips or bagasse with grate and air settings adjusted per fuel.

Key Specifications

Parameter DZL range
Rated evaporation 1-20 t/h
Rated steam pressure 0.7-2.5 MPa
Configuration Single drum, vertical, three-pass, chain grate
Fuels Coal, rice husk, wood chips, bagasse
Combustion Mechanical chain grate with ash removal
Application Saturated steam for process and power use

Exact figures for each size are set at order stage against your steam demand, fuel analysis and site conditions.

Fuel and Capacity Range

The DZL family spans 1-20 t/h at 0.7-2.5 MPa, so one platform can serve a small processing line or a larger mill. It is built for the fuels common in Asia, Africa and the Middle East: rice husk from milling, wood chips and sawdust from woodworking, bagasse from sugar, and coal where it is the practical choice. Because the chain grate handles solid fuel directly, you are not tied to a single supply chain; our engineers review your fuel’s moisture, ash and sizing and set the grate speed and air distribution to match.

Applications

DZL boilers are used wherever reliable process steam matters:

  • Rice mills and grain processing
  • Sugar mills firing bagasse
  • Wood, plywood and furniture plants
  • Food and beverage processing
  • Textile and garment factories
  • Chemicals, paper and general manufacturing

If you are still comparing types, our full product range sets out steam, hot water and thermal oil options side by side.

Installation and Service in Asia, Africa and the Middle East

We support Asia, Africa and the Middle Eastn customers from enquiry through commissioning. Our team reviews your fuel, load profile and site to size the boiler correctly, then coordinates delivery and start-up. Routine service covers grate and refractory inspection, water treatment guidance and combustion tuning as your fuel mix changes. To discuss a project, reach us through our contact page.

Frequently Asked Questions

Can the DZL burn both coal and rice husk?

Yes. The chain grate accepts solid fuels including coal, rice husk, wood chips and bagasse. We set grate speed and air distribution for the fuel you plan to use, and can advise if you intend to switch fuels seasonally.

What capacity range is available?

The DZL is offered from 1 to 20 t/h at 0.7-2.5 MPa. The right size depends on your steam load, hours of operation and fuel properties, which we assess during selection.

How is the boiler installed in Asia, Africa and the Middle East?

Installation is planned with your site contractor and our engineers, covering foundations, steam and water connections, and commissioning checks before handover. We stay available for start-up support.

What maintenance does a chain grate boiler need?

Regular checks of the grate, ash system, refractory and water side keep performance steady. We provide a maintenance schedule and guidance on water treatment when the unit is commissioned.

Next step

Tell us about your steam demand

Share your process load, working pressure, fuel availability, and site location. We will reply with a model shortlist and capacity range.

WhatsApp Email Contact