Skip to content
RKO BOILER

WNS Integrated Condensing Boiler

RKO BOILER's WNS integrated condensing boiler is a packaged fire-tube unit with built-in economiser and condenser, 1-20 t/h, thermal efficiency above 98%, for Asia, Africa and the Middle Eastn plants.

Home // Product models // WNS Integrated Condensing Boiler

RKO BOILER's WNS integrated condensing boiler is a packaged fire-tube unit with built-in economiser and condenser, 1-20 t/h, thermal efficiency above 98%, for Asia, Africa and the Middle Eastn plants.

RKO BOILER’s WNS integrated condensing boiler is a packaged fire-tube unit that combines the burner, boiler body, economiser and condenser in one factory-assembled skid. It is built for plants in Asia, Africa and the Middle East that run on natural gas, LPG or light fuel oil and need high efficiency from a compact footprint. Capacity spans 1 to 20 t/h, with thermal efficiency above 98% when the flue gas is cooled below its dew point in the integrated condenser.

How the WNS integrated condensing boiler works

Fuel is burned in the furnace at the front of the horizontal shell. Hot gas makes three passes: first through the large central furnace, then back through fire tubes, then forward through a second tube bank before leaving the shell. Instead of exhausting straight to the stack, the gas passes through an integrated economiser and condenser module mounted on the boiler skid. There the water feed is preheated and the flue gas is cooled to a point where the water vapour in it condenses, recovering latent heat that a conventional boiler releases up the chimney. The condensate drains away, and the cooled gas leaves at low temperature. Because the economiser and condenser are part of the package, there is no separate field-erected heat recovery train to design, insulate or align on site.

The burner is matched to the boiler and modulated to follow steam demand, so the unit holds pressure without short cycling. A PLC-based control cabinet manages water level, flame safety, pressure and temperature limits, and the condensing circuit. The whole package arrives tested, wired and piped, which shortens commissioning compared with site-built assemblies.

Key specifications

Item WNS integrated condensing boiler
Type Packaged horizontal fire-tube, three-pass, with integrated economiser and condenser
Rated capacity 1–20 t/h steam (hot water versions available on request)
Design pressure 1.0–1.6 MPa (typical; set to project requirement)
Thermal efficiency Above 98% (condensing mode, based on lower heating value)
Fuels Natural gas, LPG, light fuel oil; dual-fuel options available
Burner Modulating, matched to boiler, low-NOx options available
Heat recovery Integrated economiser and flue-gas condenser on the boiler skid
Control PLC cabinet with flame safety, level and pressure control
Delivery Factory-assembled and tested, shipped as a package

Fuel and capacity range

The WNS integrated condensing boiler covers 1 to 20 t/h in a single packaged range, so a small laundry and a mid-size food plant can draw from the same proven design. Natural gas gives the cleanest condensing duty and the highest recovery; LPG and light fuel oil are supported, with dual-fuel burners available where supply security matters. Efficiency above 98% depends on the return-water temperature being low enough for condensation to occur, which is why RKO BOILER reviews the whole steam and condensate loop before sizing the unit. Where a plant runs high return temperatures, we advise on the layout that lets the condenser do its work.

Applications

  • Food and beverage processing: cooking, pasteurising, sterilising, CIP
  • Textile and garment finishing
  • Pharmaceutical and chemical processing
  • Hotels, hospitals and commercial buildings needing steam or hot water
  • Rubber, paper and packaging plants

Explore the full range on our products page or see the wider gas and oil fired boiler category.

Installation and service in Asia, Africa and the Middle East

RKO BOILER has built industrial boilers in Zhengzhou, Henan since 1981, and we support Asia, Africa and the Middle Eastn projects from inquiry through commissioning. We help with capacity and fuel selection, prepare the drawings your mechanical and electrical contractors need, and coordinate shipment to Manila or regional ports. On site, our engineers supervise installation, pressure testing and burner tuning, and train your operators on the control cabinet and the condensate drain on the condensing module. Spare parts and technical response are handled through our regional channel. To discuss a project, contact our team.

Next step

Tell us about your steam demand

Share your process load, working pressure, fuel availability, and site location. We will reply with a model shortlist and capacity range.

WhatsApp Email Contact