Skip to content
RKO BOILER

YLW Biomass Fired Thermal Oil Boiler

RKO YLW biomass thermal oil boiler: chain-grate fired hot oil heater, 1200-14000 kW, for plywood, palm oil and chemical plants across Asia, Africa and the Middle East.

Home // Product models // YLW Biomass Fired Thermal Oil Boiler

RKO YLW biomass thermal oil boiler: chain-grate fired hot oil heater, 1200-14000 kW, for plywood, palm oil and chemical plants across Asia, Africa and the Middle East.

The RKO YLW is a biomass fired thermal oil boiler that heats a circulating oil instead of water, delivering hot oil at low pressure for processes that need steady temperatures up to 320 °C. It is built with a chain grate and covers 1200 to 14000 kW, which suits plywood presses, palm oil mills and chemical plants in Asia, Africa and the Middle East. Every unit is engineered, assembled and tested at our Zhengzhou works, then shipped and commissioned by our regional service team.

How the YLW Biomass Thermal Oil Boiler Works

Biomass fuel is fed onto a moving chain grate, where it burns in a controlled bed. Hot flue gas passes over a coil assembly in which the thermal oil circulates in a closed loop. The oil absorbs heat and is pumped to your process equipment, then returns to the heater to be reheated. Because the system runs at low pressure, you avoid the pressure vessel duties, blowdown and water treatment that come with steam boilers, while still reaching the process temperatures your line needs.

The three-pass gas path extracts heat before exhaust leaves the stack, and the grate speed is adjusted to match load. A forced-draft fan supplies combustion air, and the control cabinet modulates firing to hold the outlet oil temperature within a narrow band. The loop is closed, so oil consumption is limited to make-up for leaks and maintenance.

Key Specifications

Figures below describe the standard YLW range. Final ratings are confirmed against your fuel analysis and load profile before the order is placed.

Parameter Model data
Model YLW series, biomass fired thermal oil boiler
Rated thermal capacity 1200–14000 kW
Design outlet oil temperature Up to 320 °C
Design pressure Low pressure, atmospheric-loop design
Combustion system Chain grate stoker, forced draft
Fuel Biomass: wood chips, sawdust, wood pellets, rice husk, coconut shell, palm kernel shell
Gas path Three-pass coil arrangement
Heat transfer medium Circulating thermal oil, closed loop
Control PLC-based cabinet with temperature and safety interlocks
Delivery Skid-mounted sections, site assembly

Fuel and Capacity Range

The YLW burns solid biomass on a chain grate, which tolerates the moisture and ash found in agricultural residues. In Asia, Africa and the Middle East this commonly means wood waste from sawmills and furniture shops, rice husk from milling, coconut shell and palm kernel shell from oil mills. Fuel sizing and moisture are checked at the enquiry stage so the grate and furnace volume are matched to what you can actually buy locally.

Capacity runs from 1200 kW for a single press line or small dryer up to 14000 kW for a large plant with several heat users. If your demand sits between two sizes, we size on peak load plus a margin rather than rounding up unnecessarily.

Applications

  • Plywood and veneer plants: hot oil for press platens and veneer dryers, where steady temperature protects glue cure.
  • Palm oil mills: heat for sterilisation, digestion and kernel drying, with palm kernel shell as a ready fuel.
  • Chemical plants: reactor jackets, distillation reboilers and storage heating at low pressure.
  • Other process users: textile finishing, food processing and building materials such as gypsum board.

If your process needs steam rather than hot oil, browse the full range on our products page or compare options on our thermal oil boiler category page.

Installation and Service in Asia, Africa and the Middle East

RKO has supplied industrial boilers from Zhengzhou since 1981, and Asia, Africa and the Middle East is a core market for us. For Asia, Africa and the Middle Eastn projects we prepare foundation and piping layouts against your site drawings, ship skid-mounted sections, and send engineers for erection supervision, oil filling, trial firing and operator training. Our regional team supports start-up and scheduled maintenance, and spare parts such as grate bars, coils and control components are held for fast dispatch.

Send your fuel specification, required oil temperature and load profile through our contact page and we will return a sized proposal.

FAQ

What biomass fuels can the YLW burn?

Wood chips, sawdust, wood pellets, rice husk, coconut shell and palm kernel shell are all suitable. We confirm grate and furnace sizing against your actual fuel analysis, including moisture and ash, before manufacture.

What capacity range is available?

The standard YLW range covers 1200 to 14000 kW thermal output, with outlet oil temperature up to 320 °C. Units are sized to your peak process load with an agreed margin.

Is a thermal oil heater safer than a steam boiler?

The loop operates at low pressure, so it is not a pressure vessel in the steam sense and needs no blowdown or feedwater treatment. It still requires correct installation, oil quality control and scheduled inspection, which our commissioning team covers during training.

Do you support installation in Asia, Africa and the Middle East?

Yes. We provide layout drawings, ship skid-mounted sections, supervise erection and trial firing on site, train your operators and support maintenance with regional spare parts stock.

Next step

Tell us about your steam demand

Share your process load, working pressure, fuel availability, and site location. We will reply with a model shortlist and capacity range.

WhatsApp Email Contact